13-11-2014, 16:48 PM
Tea, kas siinmail ka kardi rehve keemiaga töödeldakse, aga soovitatakse kas valmiskeemiat "kart tire softener" või ise keemilaborit proovida:
Here's the ones kart racers use often I found on 4cycle.com and other kart sites.
1. 1/3 acetone, 1/3 mineral spirits, 1/3 transmission fluid - This prep is for at the track application. I Have found that is takes about 15 - 30 minutes soak time depending on the weather and works pretty good.
2. 1/3 mineral spirits, 2/3 diesel fuel - This prep is very slow soak stuff.
3. 1/3 transmission fluid, 1/3 diesel fuel, 1/3 mineral spirits - I have not used this one.
4. 8 ounces TIRE CLAW, 1 quart diesel fuel, and the balance of a gallon Xylene - fast tire prep. Person who gave me this claims it will soften a 70 (durometer) to a 0 in about 20 minutes!
5. 50% Xylene - 50% Toluene - This is for at the track application where quick softening is needed. I have to say so far this is my favorite. I requires less than 10 minutes soak time and really works.
Here's the ones kart racers use often I found on 4cycle.com and other kart sites.
1. 1/3 acetone, 1/3 mineral spirits, 1/3 transmission fluid - This prep is for at the track application. I Have found that is takes about 15 - 30 minutes soak time depending on the weather and works pretty good.
2. 1/3 mineral spirits, 2/3 diesel fuel - This prep is very slow soak stuff.
3. 1/3 transmission fluid, 1/3 diesel fuel, 1/3 mineral spirits - I have not used this one.
4. 8 ounces TIRE CLAW, 1 quart diesel fuel, and the balance of a gallon Xylene - fast tire prep. Person who gave me this claims it will soften a 70 (durometer) to a 0 in about 20 minutes!
5. 50% Xylene - 50% Toluene - This is for at the track application where quick softening is needed. I have to say so far this is my favorite. I requires less than 10 minutes soak time and really works.