diy mahlapress.
#66

Puudu oli veel toimiv õunapurusti.

Tegin tulekustutile põhja augu, ajasin mingi 12mm võlli läbi. Keerme vahele sobiv seib ja keevitasin kinni.
Ümberringi šamblooni ja joonlauaga augud ning keevitasin poldid sisse. Poldil väljas  pea + 3-5mm keerme jagu.

Kolu tegin prototüüpimise põhimõttel, ehk ainult kättesaadav materjal ning minimaalselt kruve, et näha kas üldse töötab.
Mootoriks sai segumikser, mis läks keermestatud käepideme kohaga prussi külge. Teine ots on võll-spindel.

Peale esimest katsetust selgus, et poldid freesisid õunad ära ja kuna poldid ilusti ühes reas, siis õunu edasi ei liigutatud.
Pidin lisana juurde panema "puhastaja" ehk metalli riba läks ühele poldi reale juurde. Toimib!.

Pudi on viisakas, mis alt välja tuleb. Natuke tuleb seadistada trumli ja seina vahelist kaugust, siis saab pudi väiksemaks, vahel viiskab nii 1/5 õunast sisse.

Konstrui ehitan viisakaks ümber, see oli ainult katseproto. Kunagi . . . ehk, kui kiire möödas . . . (10a perspektiivis).
[Pilt: IMG_3461.jpg]
[Pilt: IMG_3464.jpg][Pilt: IMG_3465.jpg]
Vasta


Sõnumeid selles teemas
diy mahlapress. - Autor: Killer666 - 20-08-2013, 20:08 PM
RE: diy mahlapress. - Autor: Illimar - 20-08-2013, 20:38 PM
RE: diy mahlapress. - Autor: Killer666 - 20-08-2013, 20:53 PM
RE: diy mahlapress. - Autor: nunu - 21-08-2013, 00:11 AM
RE: diy mahlapress. - Autor: pontu6 - 20-08-2013, 20:40 PM
RE: diy mahlapress. - Autor: muska71 - 27-08-2013, 19:03 PM
RE: diy mahlapress. - Autor: Alts - 20-08-2013, 20:57 PM
RE: diy mahlapress. - Autor: hulgus - 21-08-2013, 00:05 AM
RE: diy mahlapress. - Autor: Arnol - 25-08-2013, 19:36 PM
RE: diy mahlapress. - Autor: runts - 25-08-2013, 19:56 PM
RE: diy mahlapress. - Autor: Killer666 - 25-08-2013, 20:01 PM
RE: diy mahlapress. - Autor: pen.skar - 25-08-2013, 20:11 PM
RE: diy mahlapress. - Autor: runts - 25-08-2013, 20:15 PM
RE: diy mahlapress. - Autor: tiitnato - 25-08-2013, 22:33 PM
RE: diy mahlapress. - Autor: lauren - 25-08-2013, 23:21 PM
RE: diy mahlapress. - Autor: diesel - 25-08-2013, 23:24 PM
RE: diy mahlapress. - Autor: pontu6 - 26-08-2013, 00:05 AM
RE: diy mahlapress. - Autor: pen.skar - 25-08-2013, 23:37 PM
RE: diy mahlapress. - Autor: aavu - 26-08-2013, 08:23 AM
RE: diy mahlapress. - Autor: sugraM - 26-08-2013, 08:48 AM
RE: diy mahlapress. - Autor: MeelisV - 26-08-2013, 09:13 AM
RE: diy mahlapress. - Autor: pvr - 02-09-2013, 11:03 AM
RE: diy mahlapress. - Autor: sugraM - 21-09-2016, 19:19 PM
RE: diy mahlapress. - Autor: Ishijupp - 26-08-2013, 18:41 PM
RE: diy mahlapress. - Autor: Killer666 - 26-08-2013, 19:00 PM
RE: diy mahlapress. - Autor: Mahno - 27-08-2013, 16:52 PM
RE: diy mahlapress. - Autor: nustu826 - 27-08-2013, 20:35 PM
RE: diy mahlapress. - Autor: myrakaru - 02-09-2013, 11:59 AM
RE: diy mahlapress. - Autor: TeeTL - 30-09-2013, 14:30 PM
RE: diy mahlapress. - Autor: Walter - 02-09-2013, 12:30 PM
RE: diy mahlapress. - Autor: laplander - 02-09-2013, 19:38 PM
RE: diy mahlapress. - Autor: muska71 - 03-09-2013, 17:58 PM
RE: diy mahlapress. - Autor: hulgus - 25-09-2013, 22:32 PM
RE: diy mahlapress. - Autor: PlyVal64 - 29-09-2013, 21:37 PM
RE: diy mahlapress. - Autor: MeelisV - 30-09-2013, 11:09 AM
RE: diy mahlapress. - Autor: PlyVal64 - 06-10-2013, 23:43 PM
RE: diy mahlapress. - Autor: PlyVal64 - 30-09-2013, 16:05 PM
RE: diy mahlapress. - Autor: mlsluik - 30-09-2013, 17:14 PM
RE: diy mahlapress. - Autor: PlyVal64 - 30-09-2013, 18:05 PM
RE: diy mahlapress. - Autor: mlsluik - 30-09-2013, 18:19 PM
RE: diy mahlapress. - Autor: pontu6 - 30-09-2013, 17:26 PM
RE: diy mahlapress. - Autor: Ishijupp - 30-09-2013, 17:52 PM
RE: diy mahlapress. - Autor: pontu6 - 30-09-2013, 18:27 PM
RE: diy mahlapress. - Autor: pontu6 - 03-10-2014, 11:12 AM
RE: diy mahlapress. - Autor: Basilio - 30-09-2013, 19:09 PM
RE: diy mahlapress. - Autor: pontu6 - 01-10-2013, 13:35 PM
RE: diy mahlapress. - Autor: maisalup - 29-07-2015, 19:57 PM
RE: diy mahlapress. - Autor: alfredo - 04-09-2015, 17:42 PM
RE: diy mahlapress. - Autor: diesel - 04-09-2015, 17:55 PM
RE: diy mahlapress. - Autor: rocker - 26-09-2015, 18:17 PM
RE: diy mahlapress. - Autor: tanel. - 26-09-2015, 19:12 PM
RE: diy mahlapress. - Autor: Marko - 26-09-2015, 18:26 PM
RE: diy mahlapress. - Autor: diesel - 26-09-2015, 20:09 PM
RE: diy mahlapress. - Autor: rocker - 26-09-2015, 21:50 PM
RE: diy mahlapress. - Autor: vanauss - 27-09-2015, 10:39 AM
RE: diy mahlapress. - Autor: nootsii - 27-09-2015, 11:41 AM
RE: diy mahlapress. - Autor: Basilio - 27-09-2015, 13:36 PM
RE: diy mahlapress. - Autor: tanel. - 27-09-2015, 13:54 PM
RE: diy mahlapress. - Autor: Gravity - 27-09-2015, 18:17 PM
RE: diy mahlapress. - Autor: vanauss - 27-09-2015, 19:24 PM
RE: diy mahlapress. - Autor: diesel - 27-09-2015, 20:02 PM
RE: diy mahlapress. - Autor: maisalup - 27-09-2015, 21:42 PM
RE: diy mahlapress. - Autor: kaarelj - 02-11-2015, 00:14 AM
RE: diy mahlapress. - Autor: muskaa71 - 02-11-2015, 15:34 PM
RE: diy mahlapress. - Autor: pkmp - 01-12-2015, 17:23 PM
RE: diy mahlapress. - Autor: Marko - 01-12-2015, 17:40 PM
RE: diy mahlapress. - Autor: kaarelj - 05-09-2016, 16:56 PM
RE: diy mahlapress. - Autor: isandpauk - 22-09-2016, 09:02 AM
RE: diy mahlapress. - Autor: kaarelj - 22-09-2016, 23:54 PM
RE: diy mahlapress. - Autor: Veskioja - 27-09-2016, 16:50 PM
RE: diy mahlapress. - Autor: alfredo - 05-09-2016, 22:10 PM
RE: diy mahlapress. - Autor: muska71 - 21-09-2016, 20:03 PM
RE: diy mahlapress. - Autor: alfredo - 22-09-2016, 18:31 PM
RE: diy mahlapress. - Autor: Talupoeg taluja - 22-09-2016, 19:38 PM
RE: diy mahlapress. - Autor: isandpauk - 22-09-2016, 21:59 PM
RE: diy mahlapress. - Autor: alfredo - 23-09-2016, 07:48 AM
RE: diy mahlapress. - Autor: nustu826 - 27-09-2016, 21:38 PM
RE: diy mahlapress. - Autor: linnuke - 27-09-2016, 21:59 PM
RE: diy mahlapress. - Autor: Marko - 29-09-2016, 22:56 PM
RE: diy mahlapress. - Autor: linnuke - 29-09-2016, 23:11 PM
RE: diy mahlapress. - Autor: lauren - 02-10-2016, 20:49 PM
RE: diy mahlapress. - Autor: Marko - 10-10-2016, 22:38 PM
RE: diy mahlapress. - Autor: muska71 - 11-10-2016, 14:37 PM
RE: diy mahlapress. - Autor: raulex - 29-09-2016, 06:27 AM
RE: diy mahlapress. - Autor: huvi5 - 29-09-2016, 19:56 PM
RE: diy mahlapress. - Autor: linnuke - 29-09-2016, 21:12 PM
RE: diy mahlapress. - Autor: isandpauk - 29-09-2016, 21:28 PM
RE: diy mahlapress. - Autor: linnuke - 01-10-2016, 12:18 PM
RE: diy mahlapress. - Autor: Veskioja - 01-10-2016, 21:16 PM
RE: diy mahlapress. - Autor: linnuke - 01-10-2016, 21:31 PM
RE: diy mahlapress. - Autor: linnuke - 01-10-2016, 21:52 PM
RE: diy mahlapress. - Autor: Veskioja - 01-10-2016, 23:23 PM
RE: diy mahlapress. - Autor: linnuke - 01-10-2016, 23:45 PM
RE: diy mahlapress. - Autor: motamees - 02-10-2016, 10:37 AM
RE: diy mahlapress. - Autor: alfredo - 02-10-2016, 21:58 PM
RE: diy mahlapress. - Autor: Envir - 11-10-2016, 10:04 AM
RE: diy mahlapress. - Autor: linnuke - 11-10-2016, 14:30 PM
RE: diy mahlapress. - Autor: Marko - 11-10-2016, 14:30 PM
RE: diy mahlapress. - Autor: linnuke - 19-10-2016, 21:26 PM
RE: diy mahlapress. - Autor: sugraM - 20-10-2016, 07:08 AM
RE: diy mahlapress. - Autor: Talupoeg taluja - 29-10-2016, 22:35 PM
RE: diy mahlapress. - Autor: linnuke - 29-10-2016, 22:56 PM
RE: diy mahlapress. - Autor: Talupoeg taluja - 30-10-2016, 12:43 PM
RE: diy mahlapress. - Autor: Basilio - 30-10-2016, 18:05 PM
RE: diy mahlapress. - Autor: Martti - 14-01-2017, 20:54 PM
RE: diy mahlapress. - Autor: Killer666 - 30-10-2016, 10:27 AM
RE: diy mahlapress. - Autor: Talupoeg taluja - 30-10-2016, 12:40 PM
RE: diy mahlapress. - Autor: Talupoeg taluja - 30-10-2016, 18:27 PM
RE: diy mahlapress. - Autor: muska71 - 30-10-2016, 19:05 PM
RE: diy mahlapress. - Autor: Talupoeg taluja - 30-10-2016, 19:15 PM
RE: diy mahlapress. - Autor: Basilio - 31-10-2016, 13:18 PM
RE: diy mahlapress. - Autor: rocker - 01-11-2016, 09:02 AM
RE: diy mahlapress. - Autor: Marko - 30-10-2016, 19:28 PM
RE: diy mahlapress. - Autor: Talupoeg taluja - 30-10-2016, 19:46 PM
RE: diy mahlapress. - Autor: meli666 - 30-10-2016, 21:30 PM
RE: diy mahlapress. - Autor: Talupoeg taluja - 30-10-2016, 21:43 PM
RE: diy mahlapress. - Autor: kylminaator - 30-10-2016, 22:31 PM
RE: diy mahlapress. - Autor: Talupoeg taluja - 31-10-2016, 13:39 PM
RE: diy mahlapress. - Autor: Talupoeg taluja - 01-11-2016, 18:13 PM
RE: diy mahlapress. - Autor: Marko - 01-11-2016, 18:41 PM
RE: diy mahlapress. - Autor: Talupoeg taluja - 01-11-2016, 18:56 PM
RE: diy mahlapress. - Autor: meli666 - 16-08-2018, 22:11 PM
RE: diy mahlapress. - Autor: Marko - 16-08-2018, 22:37 PM
RE: diy mahlapress. - Autor: viplala - 16-08-2018, 22:54 PM
RE: diy mahlapress. - Autor: meli666 - 16-08-2018, 22:56 PM
RE: diy mahlapress. - Autor: honkomees - 17-08-2018, 09:12 AM
RE: diy mahlapress. - Autor: v6sa - 17-08-2018, 10:34 AM
RE: diy mahlapress. - Autor: v6sa - 17-08-2018, 10:32 AM
RE: diy mahlapress. - Autor: PlyVal64 - 17-08-2018, 11:50 AM
RE: diy mahlapress. - Autor: Marko - 17-08-2018, 11:58 AM
RE: diy mahlapress. - Autor: Mahno - 21-08-2018, 12:58 PM
RE: diy mahlapress. - Autor: meli666 - 23-08-2018, 21:52 PM
RE: diy mahlapress. - Autor: Etsike - 16-08-2018, 22:22 PM
RE: diy mahlapress. - Autor: honkomees - 16-08-2018, 22:45 PM
RE: diy mahlapress. - Autor: diesel - 17-08-2018, 09:08 AM
RE: diy mahlapress. - Autor: rocker - 26-08-2018, 12:40 PM
RE: diy mahlapress. - Autor: Marko - 22-10-2018, 00:40 AM
RE: diy mahlapress. - Autor: Etsike - 22-07-2019, 18:03 PM
RE: diy mahlapress. - Autor: rocker - 23-07-2019, 22:36 PM
RE: diy mahlapress. - Autor: viplala - 22-07-2019, 18:24 PM
RE: diy mahlapress. - Autor: Etsike - 22-07-2019, 20:09 PM
RE: diy mahlapress. - Autor: viplala - 22-07-2019, 20:28 PM
RE: diy mahlapress. - Autor: meli666 - 22-07-2019, 20:45 PM
RE: diy mahlapress. - Autor: MeelisV - 22-07-2019, 21:23 PM
RE: diy mahlapress. - Autor: viplala - 24-07-2019, 01:12 AM
RE: diy mahlapress. - Autor: pen.skar - 11-10-2022, 16:27 PM
RE: diy mahlapress. - Autor: deus - 11-10-2022, 17:24 PM
RE: diy mahlapress. - Autor: Daff - 11-10-2022, 19:00 PM
RE: diy mahlapress. - Autor: ahtos - 07-11-2022, 10:31 AM
RE: diy mahlapress. - Autor: ahtos - 08-11-2022, 20:17 PM
RE: diy mahlapress. - Autor: pen.skar - 09-11-2022, 02:31 AM
RE: diy mahlapress. - Autor: ahtos - 10-11-2022, 19:29 PM
RE: diy mahlapress. - Autor: vanaain - 10-11-2022, 22:24 PM
RE: diy mahlapress. - Autor: Marden - 11-11-2022, 13:18 PM
RE: diy mahlapress. - Autor: ahtos - 11-11-2022, 15:36 PM
RE: diy mahlapress. - Autor: mesinik - 26-11-2022, 07:37 AM
RE: diy mahlapress. - Autor: ahtos - 28-11-2022, 18:50 PM



Kasutaja, kes vaatavad seda teemat: 1 külali(st)ne