diy mahlapress.

Etsike
Kasutaja

Postitused: 308
Teemad: 11
Liitus: Dec 2005
Maine: 5

#138

22-07-2019, 18:03 PM

Viimane aeg rege rautada, hooaeg peagi käes. Eelmine hooaeg sai siis sellist tüüpi vändaga purustaja ostetud ja tarvitatud. Hiljem ka reduktormootor (370W, 90rpm), millel 20mm kiiluga võll. Teeks nüüd üksplusühte. Purustaja võll on 12mm. Mis häid ideid selle ülekande jaoks? Erilisi töövahendeid mul käepärast pole, et midagi valmis terima hakata, tuleks piirduda kaubandusest saadava kaubaga. Üks-ühele tundub üsna mõistlik olema ülekandearvuks. Rihm-ülekanne? Kust sobilikke rihmrattaid-rihma leida?
[Pilt: 1_20_49060568.jpg]

Leia

Vasta

« Järgmine vanem | Järgmine uuem »

Sõnumeid selles teemas

diy mahlapress. - Autor: Killer666 - 20-08-2013, 20:08 PM

RE: diy mahlapress. - Autor: Illimar - 20-08-2013, 20:38 PM

RE: diy mahlapress. - Autor: Killer666 - 20-08-2013, 20:53 PM

RE: diy mahlapress. - Autor: nunu - 21-08-2013, 00:11 AM

RE: diy mahlapress. - Autor: pontu6 - 20-08-2013, 20:40 PM

RE: diy mahlapress. - Autor: muska71 - 27-08-2013, 19:03 PM

RE: diy mahlapress. - Autor: Alts - 20-08-2013, 20:57 PM

RE: diy mahlapress. - Autor: hulgus - 21-08-2013, 00:05 AM

RE: diy mahlapress. - Autor: Arnol - 25-08-2013, 19:36 PM

RE: diy mahlapress. - Autor: runts - 25-08-2013, 19:56 PM

RE: diy mahlapress. - Autor: Killer666 - 25-08-2013, 20:01 PM

RE: diy mahlapress. - Autor: pen.skar - 25-08-2013, 20:11 PM

RE: diy mahlapress. - Autor: runts - 25-08-2013, 20:15 PM

RE: diy mahlapress. - Autor: tiitnato - 25-08-2013, 22:33 PM

RE: diy mahlapress. - Autor: lauren - 25-08-2013, 23:21 PM

RE: diy mahlapress. - Autor: diesel - 25-08-2013, 23:24 PM

RE: diy mahlapress. - Autor: pontu6 - 26-08-2013, 00:05 AM

RE: diy mahlapress. - Autor: pen.skar - 25-08-2013, 23:37 PM

RE: diy mahlapress. - Autor: aavu - 26-08-2013, 08:23 AM

RE: diy mahlapress. - Autor: sugraM - 26-08-2013, 08:48 AM

RE: diy mahlapress. - Autor: MeelisV - 26-08-2013, 09:13 AM

RE: diy mahlapress. - Autor: pvr - 02-09-2013, 11:03 AM

RE: diy mahlapress. - Autor: sugraM - 21-09-2016, 19:19 PM

RE: diy mahlapress. - Autor: Ishijupp - 26-08-2013, 18:41 PM

RE: diy mahlapress. - Autor: Killer666 - 26-08-2013, 19:00 PM

RE: diy mahlapress. - Autor: Mahno - 27-08-2013, 16:52 PM

RE: diy mahlapress. - Autor: nustu826 - 27-08-2013, 20:35 PM

RE: diy mahlapress. - Autor: myrakaru - 02-09-2013, 11:59 AM

RE: diy mahlapress. - Autor: TeeTL - 30-09-2013, 14:30 PM

RE: diy mahlapress. - Autor: Walter - 02-09-2013, 12:30 PM

RE: diy mahlapress. - Autor: laplander - 02-09-2013, 19:38 PM

RE: diy mahlapress. - Autor: muska71 - 03-09-2013, 17:58 PM

RE: diy mahlapress. - Autor: hulgus - 25-09-2013, 22:32 PM

RE: diy mahlapress. - Autor: PlyVal64 - 29-09-2013, 21:37 PM

RE: diy mahlapress. - Autor: MeelisV - 30-09-2013, 11:09 AM

RE: diy mahlapress. - Autor: PlyVal64 - 06-10-2013, 23:43 PM

RE: diy mahlapress. - Autor: PlyVal64 - 30-09-2013, 16:05 PM

RE: diy mahlapress. - Autor: mlsluik - 30-09-2013, 17:14 PM

RE: diy mahlapress. - Autor: PlyVal64 - 30-09-2013, 18:05 PM

RE: diy mahlapress. - Autor: mlsluik - 30-09-2013, 18:19 PM

RE: diy mahlapress. - Autor: pontu6 - 30-09-2013, 17:26 PM

RE: diy mahlapress. - Autor: Ishijupp - 30-09-2013, 17:52 PM

RE: diy mahlapress. - Autor: pontu6 - 30-09-2013, 18:27 PM

RE: diy mahlapress. - Autor: pontu6 - 03-10-2014, 11:12 AM

RE: diy mahlapress. - Autor: Basilio - 30-09-2013, 19:09 PM

RE: diy mahlapress. - Autor: pontu6 - 01-10-2013, 13:35 PM

RE: diy mahlapress. - Autor: maisalup - 29-07-2015, 19:57 PM

RE: diy mahlapress. - Autor: alfredo - 04-09-2015, 17:42 PM

RE: diy mahlapress. - Autor: diesel - 04-09-2015, 17:55 PM

RE: diy mahlapress. - Autor: rocker - 26-09-2015, 18:17 PM

RE: diy mahlapress. - Autor: tanel. - 26-09-2015, 19:12 PM

RE: diy mahlapress. - Autor: Marko - 26-09-2015, 18:26 PM

RE: diy mahlapress. - Autor: diesel - 26-09-2015, 20:09 PM

RE: diy mahlapress. - Autor: rocker - 26-09-2015, 21:50 PM

RE: diy mahlapress. - Autor: vanauss - 27-09-2015, 10:39 AM

RE: diy mahlapress. - Autor: nootsii - 27-09-2015, 11:41 AM

RE: diy mahlapress. - Autor: Basilio - 27-09-2015, 13:36 PM

RE: diy mahlapress. - Autor: tanel. - 27-09-2015, 13:54 PM

RE: diy mahlapress. - Autor: Gravity - 27-09-2015, 18:17 PM

RE: diy mahlapress. - Autor: vanauss - 27-09-2015, 19:24 PM

RE: diy mahlapress. - Autor: diesel - 27-09-2015, 20:02 PM

RE: diy mahlapress. - Autor: maisalup - 27-09-2015, 21:42 PM

RE: diy mahlapress. - Autor: kaarelj - 02-11-2015, 00:14 AM

RE: diy mahlapress. - Autor: muskaa71 - 02-11-2015, 15:34 PM

RE: diy mahlapress. - Autor: pkmp - 01-12-2015, 17:23 PM

RE: diy mahlapress. - Autor: Marko - 01-12-2015, 17:40 PM

RE: diy mahlapress. - Autor: kaarelj - 05-09-2016, 16:56 PM

RE: diy mahlapress. - Autor: isandpauk - 22-09-2016, 09:02 AM

RE: diy mahlapress. - Autor: kaarelj - 22-09-2016, 23:54 PM

RE: diy mahlapress. - Autor: Veskioja - 27-09-2016, 16:50 PM

RE: diy mahlapress. - Autor: alfredo - 05-09-2016, 22:10 PM

RE: diy mahlapress. - Autor: muska71 - 21-09-2016, 20:03 PM

RE: diy mahlapress. - Autor: alfredo - 22-09-2016, 18:31 PM

RE: diy mahlapress. - Autor: Talupoeg taluja - 22-09-2016, 19:38 PM

RE: diy mahlapress. - Autor: isandpauk - 22-09-2016, 21:59 PM

RE: diy mahlapress. - Autor: alfredo - 23-09-2016, 07:48 AM

RE: diy mahlapress. - Autor: nustu826 - 27-09-2016, 21:38 PM

RE: diy mahlapress. - Autor: linnuke - 27-09-2016, 21:59 PM

RE: diy mahlapress. - Autor: Marko - 29-09-2016, 22:56 PM

RE: diy mahlapress. - Autor: linnuke - 29-09-2016, 23:11 PM

RE: diy mahlapress. - Autor: lauren - 02-10-2016, 20:49 PM

RE: diy mahlapress. - Autor: Marko - 10-10-2016, 22:38 PM

RE: diy mahlapress. - Autor: muska71 - 11-10-2016, 14:37 PM

RE: diy mahlapress. - Autor: raulex - 29-09-2016, 06:27 AM

RE: diy mahlapress. - Autor: huvi5 - 29-09-2016, 19:56 PM

RE: diy mahlapress. - Autor: linnuke - 29-09-2016, 21:12 PM

RE: diy mahlapress. - Autor: isandpauk - 29-09-2016, 21:28 PM

RE: diy mahlapress. - Autor: linnuke - 01-10-2016, 12:18 PM

RE: diy mahlapress. - Autor: Veskioja - 01-10-2016, 21:16 PM

RE: diy mahlapress. - Autor: linnuke - 01-10-2016, 21:31 PM

RE: diy mahlapress. - Autor: linnuke - 01-10-2016, 21:52 PM

RE: diy mahlapress. - Autor: Veskioja - 01-10-2016, 23:23 PM

RE: diy mahlapress. - Autor: linnuke - 01-10-2016, 23:45 PM

RE: diy mahlapress. - Autor: motamees - 02-10-2016, 10:37 AM

RE: diy mahlapress. - Autor: alfredo - 02-10-2016, 21:58 PM

RE: diy mahlapress. - Autor: Envir - 11-10-2016, 10:04 AM

RE: diy mahlapress. - Autor: linnuke - 11-10-2016, 14:30 PM

RE: diy mahlapress. - Autor: Marko - 11-10-2016, 14:30 PM

RE: diy mahlapress. - Autor: linnuke - 19-10-2016, 21:26 PM

RE: diy mahlapress. - Autor: sugraM - 20-10-2016, 07:08 AM

RE: diy mahlapress. - Autor: Talupoeg taluja - 29-10-2016, 22:35 PM

RE: diy mahlapress. - Autor: linnuke - 29-10-2016, 22:56 PM

RE: diy mahlapress. - Autor: Talupoeg taluja - 30-10-2016, 12:43 PM

RE: diy mahlapress. - Autor: Basilio - 30-10-2016, 18:05 PM

RE: diy mahlapress. - Autor: Martti - 14-01-2017, 20:54 PM

RE: diy mahlapress. - Autor: Killer666 - 30-10-2016, 10:27 AM

RE: diy mahlapress. - Autor: Talupoeg taluja - 30-10-2016, 12:40 PM

RE: diy mahlapress. - Autor: Talupoeg taluja - 30-10-2016, 18:27 PM

RE: diy mahlapress. - Autor: muska71 - 30-10-2016, 19:05 PM

RE: diy mahlapress. - Autor: Talupoeg taluja - 30-10-2016, 19:15 PM

RE: diy mahlapress. - Autor: Basilio - 31-10-2016, 13:18 PM

RE: diy mahlapress. - Autor: rocker - 01-11-2016, 09:02 AM

RE: diy mahlapress. - Autor: Marko - 30-10-2016, 19:28 PM

RE: diy mahlapress. - Autor: Talupoeg taluja - 30-10-2016, 19:46 PM

RE: diy mahlapress. - Autor: meli666 - 30-10-2016, 21:30 PM

RE: diy mahlapress. - Autor: Talupoeg taluja - 30-10-2016, 21:43 PM

RE: diy mahlapress. - Autor: kylminaator - 30-10-2016, 22:31 PM

RE: diy mahlapress. - Autor: Talupoeg taluja - 31-10-2016, 13:39 PM

RE: diy mahlapress. - Autor: Talupoeg taluja - 01-11-2016, 18:13 PM

RE: diy mahlapress. - Autor: Marko - 01-11-2016, 18:41 PM

RE: diy mahlapress. - Autor: Talupoeg taluja - 01-11-2016, 18:56 PM

RE: diy mahlapress. - Autor: meli666 - 16-08-2018, 22:11 PM

RE: diy mahlapress. - Autor: Marko - 16-08-2018, 22:37 PM

RE: diy mahlapress. - Autor: viplala - 16-08-2018, 22:54 PM

RE: diy mahlapress. - Autor: meli666 - 16-08-2018, 22:56 PM

RE: diy mahlapress. - Autor: honkomees - 17-08-2018, 09:12 AM

RE: diy mahlapress. - Autor: v6sa - 17-08-2018, 10:34 AM

RE: diy mahlapress. - Autor: v6sa - 17-08-2018, 10:32 AM

RE: diy mahlapress. - Autor: PlyVal64 - 17-08-2018, 11:50 AM

RE: diy mahlapress. - Autor: Marko - 17-08-2018, 11:58 AM

RE: diy mahlapress. - Autor: Mahno - 21-08-2018, 12:58 PM

RE: diy mahlapress. - Autor: meli666 - 23-08-2018, 21:52 PM

RE: diy mahlapress. - Autor: Etsike - 16-08-2018, 22:22 PM

RE: diy mahlapress. - Autor: honkomees - 16-08-2018, 22:45 PM

RE: diy mahlapress. - Autor: diesel - 17-08-2018, 09:08 AM

RE: diy mahlapress. - Autor: rocker - 26-08-2018, 12:40 PM

RE: diy mahlapress. - Autor: Marko - 22-10-2018, 00:40 AM

RE: diy mahlapress. - Autor: Etsike - 22-07-2019, 18:03 PM

RE: diy mahlapress. - Autor: rocker - 23-07-2019, 22:36 PM

RE: diy mahlapress. - Autor: viplala - 22-07-2019, 18:24 PM

RE: diy mahlapress. - Autor: Etsike - 22-07-2019, 20:09 PM

RE: diy mahlapress. - Autor: viplala - 22-07-2019, 20:28 PM

RE: diy mahlapress. - Autor: meli666 - 22-07-2019, 20:45 PM

RE: diy mahlapress. - Autor: MeelisV - 22-07-2019, 21:23 PM

RE: diy mahlapress. - Autor: viplala - 24-07-2019, 01:12 AM

RE: diy mahlapress. - Autor: pen.skar - 11-10-2022, 16:27 PM

RE: diy mahlapress. - Autor: deus - 11-10-2022, 17:24 PM

RE: diy mahlapress. - Autor: Daff - 11-10-2022, 19:00 PM

RE: diy mahlapress. - Autor: ahtos - 07-11-2022, 10:31 AM

RE: diy mahlapress. - Autor: ahtos - 08-11-2022, 20:17 PM

RE: diy mahlapress. - Autor: pen.skar - 09-11-2022, 02:31 AM

RE: diy mahlapress. - Autor: ahtos - 10-11-2022, 19:29 PM

RE: diy mahlapress. - Autor: vanaain - 10-11-2022, 22:24 PM

RE: diy mahlapress. - Autor: Marden - 11-11-2022, 13:18 PM

RE: diy mahlapress. - Autor: ahtos - 11-11-2022, 15:36 PM

RE: diy mahlapress. - Autor: mesinik - 26-11-2022, 07:37 AM

RE: diy mahlapress. - Autor: ahtos - 28-11-2022, 18:50 PM

Vaata printerisõbralikku versiooni

Kasutaja, kes vaatavad seda teemat: 4 külali(st)ne

Logi sisse
Kasutajanimi:
Parool:	Kaotasid parooli?
	Mäleta mind