TIG keevitamine, materjalid
#27

Pekki läks see algus... reduktor saabus ja kurivaim ei hakka ballooni keermega. 
Peab ringi vahetama, kuid see on ka aeg. 
Eks tellib ka need tig vardad ka, kui juba proovimine edasi lükkus.

Riga7 (1972), Kovrovets K58 (1958), K58@100, Minsk M103 (1963), Jawa 360 + velorex 560 (1972), Jawa 559(1965), 2x Kovrovets K-175 (1958), Triumph Bonneville T100 (2019)

50+ vanused rattad EU matkad e. FB teema "Lõunasse Päikest otsima":  https://www.facebook.com/groups/471167806998913
Vasta


Sõnumeid selles teemas
TIG keevitamine, materjalid - Autor: qwerty009 - 17-01-2022, 17:53 PM
RE: TIG keevitamine, materjalid - Autor: 13piisab - 27-01-2022, 18:04 PM
RE: TIG keevitamine, materjalid - Autor: qwerty009 - 27-01-2022, 19:27 PM
RE: TIG keevitamine, materjalid - Autor: Mart69x - 27-01-2022, 20:59 PM
RE: TIG keevitamine, materjalid - Autor: CHRhmm - 28-01-2022, 10:10 AM
RE: TIG keevitamine, materjalid - Autor: v6sa - 28-01-2022, 10:34 AM
RE: TIG keevitamine, materjalid - Autor: twist - 28-01-2022, 10:58 AM
RE: TIG keevitamine, materjalid - Autor: qwerty009 - 28-01-2022, 12:35 PM
RE: TIG keevitamine, materjalid - Autor: CHRhmm - 28-01-2022, 13:44 PM
RE: TIG keevitamine, materjalid - Autor: CHRhmm - 29-01-2022, 17:29 PM
RE: TIG keevitamine, materjalid - Autor: mopple - 29-01-2022, 19:01 PM
RE: TIG keevitamine, materjalid - Autor: CHRhmm - 03-02-2022, 10:25 AM
RE: TIG keevitamine, materjalid - Autor: CHRhmm - 04-02-2022, 00:26 AM
RE: TIG keevitamine, materjalid - Autor: pvr - 04-02-2022, 08:50 AM
RE: TIG keevitamine, materjalid - Autor: CHRhmm - 04-02-2022, 23:45 PM
RE: TIG keevitamine, materjalid - Autor: muska71 - 05-02-2022, 10:32 AM
RE: TIG keevitamine, materjalid - Autor: tõnn - 05-02-2022, 12:10 PM
RE: TIG keevitamine, materjalid - Autor: korvimees - 05-02-2022, 13:09 PM
RE: TIG keevitamine, materjalid - Autor: muska71 - 05-02-2022, 17:35 PM
RE: TIG keevitamine, materjalid - Autor: Janka - 05-02-2022, 13:28 PM
RE: TIG keevitamine, materjalid - Autor: CHRhmm - 05-02-2022, 19:42 PM
RE: TIG keevitamine, materjalid - Autor: robi - 07-02-2022, 14:33 PM
RE: TIG keevitamine, materjalid - Autor: isandpauk - 07-02-2022, 15:19 PM
RE: TIG keevitamine, materjalid - Autor: CHRhmm - 07-02-2022, 17:34 PM
RE: TIG keevitamine, materjalid - Autor: mopple - 07-02-2022, 20:27 PM
RE: TIG keevitamine, materjalid - Autor: lennumoto - 16-10-2022, 20:28 PM
RE: TIG keevituse valik? - Autor: qwerty009 - 17-01-2022, 18:00 PM
RE: TIG keevituse valik? - Autor: pvr - 17-01-2022, 19:11 PM
RE: TIG keevituse valik? - Autor: mopple - 18-01-2022, 00:41 AM
RE: TIG keevituse valik? - Autor: mopple - 18-01-2022, 16:06 PM
RE: TIG keevituse valik? - Autor: Brrr - 18-01-2022, 20:33 PM
RE: TIG keevituse valik? - Autor: CHRhmm - 27-01-2022, 11:15 AM
RE: TIG keevituse valik? - Autor: Kult - 27-01-2022, 11:25 AM
RE: TIG keevituse valik? - Autor: Mart Laanelepp - 27-01-2022, 11:31 AM
RE: TIG keevituse valik? - Autor: qwerty009 - 27-01-2022, 11:34 AM
RE: TIG keevituse valik? - Autor: CHRhmm - 27-01-2022, 11:44 AM
RE: TIG keevituse valik? - Autor: pvr - 27-01-2022, 13:50 PM
RE: TIG keevituse valik? - Autor: Marko - 27-01-2022, 14:03 PM
RE: TIG keevituse valik? - Autor: tõnn - 27-01-2022, 16:17 PM
RE: TIG keevituse valik? - Autor: linnuke - 27-01-2022, 16:21 PM
RE: TIG keevituse valik? - Autor: mopple - 27-01-2022, 17:06 PM
RE: TIG keevituse valik? - Autor: CHRhmm - 27-01-2022, 17:27 PM
[poolita] TIG keevituse valik? - Autor: mopple - 27-01-2022, 18:08 PM
RE: [poolita] TIG keevituse valik? - Autor: muska71 - 03-02-2022, 14:29 PM
RE: [poolita] TIG keevituse valik? - Autor: isandpauk - 04-02-2022, 13:39 PM
RE: [poolita] TIG keevituse valik? - Autor: Peeter80 - 04-02-2022, 18:45 PM



Kasutaja, kes vaatavad seda teemat: 1 külali(st)ne