diy mahlapress.

Marko
Emeriitlukksepp

Postitused: 6,707
Teemad: 57
Liitus: Jul 2012
Maine: 90

#124

16-08-2018, 22:37 PM

(16-08-2018, 22:11 PM)meli666 Kirjutas: Lisaks need nagad pidid olema liiga väikesed.

Mõõdu kohta ei tea öelda, aga see torkab küll silma, et nagad on ilma nihutuseta, kõik ilusti treipingist vist tulnud. Niimoodi teeb õunale triibud peale, purustamiseks peab tööorgani ilmselt uue tegema.
Vaata teise purusti riivi! Seal on järgmine augurida jälle natuke tsentrile lähemal.

Müün: keermetõrv, puidulakk, alumiiniumtorud.

Leia

Vasta

« Järgmine vanem | Järgmine uuem »

Sõnumeid selles teemas

diy mahlapress. - Autor: Killer666 - 20-08-2013, 20:08 PM

RE: diy mahlapress. - Autor: Illimar - 20-08-2013, 20:38 PM

RE: diy mahlapress. - Autor: Killer666 - 20-08-2013, 20:53 PM

RE: diy mahlapress. - Autor: nunu - 21-08-2013, 00:11 AM

RE: diy mahlapress. - Autor: pontu6 - 20-08-2013, 20:40 PM

RE: diy mahlapress. - Autor: muska71 - 27-08-2013, 19:03 PM

RE: diy mahlapress. - Autor: Alts - 20-08-2013, 20:57 PM

RE: diy mahlapress. - Autor: hulgus - 21-08-2013, 00:05 AM

RE: diy mahlapress. - Autor: Arnol - 25-08-2013, 19:36 PM

RE: diy mahlapress. - Autor: runts - 25-08-2013, 19:56 PM

RE: diy mahlapress. - Autor: Killer666 - 25-08-2013, 20:01 PM

RE: diy mahlapress. - Autor: pen.skar - 25-08-2013, 20:11 PM

RE: diy mahlapress. - Autor: runts - 25-08-2013, 20:15 PM

RE: diy mahlapress. - Autor: tiitnato - 25-08-2013, 22:33 PM

RE: diy mahlapress. - Autor: lauren - 25-08-2013, 23:21 PM

RE: diy mahlapress. - Autor: diesel - 25-08-2013, 23:24 PM

RE: diy mahlapress. - Autor: pontu6 - 26-08-2013, 00:05 AM

RE: diy mahlapress. - Autor: pen.skar - 25-08-2013, 23:37 PM

RE: diy mahlapress. - Autor: aavu - 26-08-2013, 08:23 AM

RE: diy mahlapress. - Autor: sugraM - 26-08-2013, 08:48 AM

RE: diy mahlapress. - Autor: MeelisV - 26-08-2013, 09:13 AM

RE: diy mahlapress. - Autor: pvr - 02-09-2013, 11:03 AM

RE: diy mahlapress. - Autor: sugraM - 21-09-2016, 19:19 PM

RE: diy mahlapress. - Autor: Ishijupp - 26-08-2013, 18:41 PM

RE: diy mahlapress. - Autor: Killer666 - 26-08-2013, 19:00 PM

RE: diy mahlapress. - Autor: Mahno - 27-08-2013, 16:52 PM

RE: diy mahlapress. - Autor: nustu826 - 27-08-2013, 20:35 PM

RE: diy mahlapress. - Autor: myrakaru - 02-09-2013, 11:59 AM

RE: diy mahlapress. - Autor: TeeTL - 30-09-2013, 14:30 PM

RE: diy mahlapress. - Autor: Walter - 02-09-2013, 12:30 PM

RE: diy mahlapress. - Autor: laplander - 02-09-2013, 19:38 PM

RE: diy mahlapress. - Autor: muska71 - 03-09-2013, 17:58 PM

RE: diy mahlapress. - Autor: hulgus - 25-09-2013, 22:32 PM

RE: diy mahlapress. - Autor: PlyVal64 - 29-09-2013, 21:37 PM

RE: diy mahlapress. - Autor: MeelisV - 30-09-2013, 11:09 AM

RE: diy mahlapress. - Autor: PlyVal64 - 06-10-2013, 23:43 PM

RE: diy mahlapress. - Autor: PlyVal64 - 30-09-2013, 16:05 PM

RE: diy mahlapress. - Autor: mlsluik - 30-09-2013, 17:14 PM

RE: diy mahlapress. - Autor: PlyVal64 - 30-09-2013, 18:05 PM

RE: diy mahlapress. - Autor: mlsluik - 30-09-2013, 18:19 PM

RE: diy mahlapress. - Autor: pontu6 - 30-09-2013, 17:26 PM

RE: diy mahlapress. - Autor: Ishijupp - 30-09-2013, 17:52 PM

RE: diy mahlapress. - Autor: pontu6 - 30-09-2013, 18:27 PM

RE: diy mahlapress. - Autor: pontu6 - 03-10-2014, 11:12 AM

RE: diy mahlapress. - Autor: Basilio - 30-09-2013, 19:09 PM

RE: diy mahlapress. - Autor: pontu6 - 01-10-2013, 13:35 PM

RE: diy mahlapress. - Autor: maisalup - 29-07-2015, 19:57 PM

RE: diy mahlapress. - Autor: alfredo - 04-09-2015, 17:42 PM

RE: diy mahlapress. - Autor: diesel - 04-09-2015, 17:55 PM

RE: diy mahlapress. - Autor: rocker - 26-09-2015, 18:17 PM

RE: diy mahlapress. - Autor: tanel. - 26-09-2015, 19:12 PM

RE: diy mahlapress. - Autor: Marko - 26-09-2015, 18:26 PM

RE: diy mahlapress. - Autor: diesel - 26-09-2015, 20:09 PM

RE: diy mahlapress. - Autor: rocker - 26-09-2015, 21:50 PM

RE: diy mahlapress. - Autor: vanauss - 27-09-2015, 10:39 AM

RE: diy mahlapress. - Autor: nootsii - 27-09-2015, 11:41 AM

RE: diy mahlapress. - Autor: Basilio - 27-09-2015, 13:36 PM

RE: diy mahlapress. - Autor: tanel. - 27-09-2015, 13:54 PM

RE: diy mahlapress. - Autor: Gravity - 27-09-2015, 18:17 PM

RE: diy mahlapress. - Autor: vanauss - 27-09-2015, 19:24 PM

RE: diy mahlapress. - Autor: diesel - 27-09-2015, 20:02 PM

RE: diy mahlapress. - Autor: maisalup - 27-09-2015, 21:42 PM

RE: diy mahlapress. - Autor: kaarelj - 02-11-2015, 00:14 AM

RE: diy mahlapress. - Autor: muskaa71 - 02-11-2015, 15:34 PM

RE: diy mahlapress. - Autor: pkmp - 01-12-2015, 17:23 PM

RE: diy mahlapress. - Autor: Marko - 01-12-2015, 17:40 PM

RE: diy mahlapress. - Autor: kaarelj - 05-09-2016, 16:56 PM

RE: diy mahlapress. - Autor: isandpauk - 22-09-2016, 09:02 AM

RE: diy mahlapress. - Autor: kaarelj - 22-09-2016, 23:54 PM

RE: diy mahlapress. - Autor: Veskioja - 27-09-2016, 16:50 PM

RE: diy mahlapress. - Autor: alfredo - 05-09-2016, 22:10 PM

RE: diy mahlapress. - Autor: muska71 - 21-09-2016, 20:03 PM

RE: diy mahlapress. - Autor: alfredo - 22-09-2016, 18:31 PM

RE: diy mahlapress. - Autor: Talupoeg taluja - 22-09-2016, 19:38 PM

RE: diy mahlapress. - Autor: isandpauk - 22-09-2016, 21:59 PM

RE: diy mahlapress. - Autor: alfredo - 23-09-2016, 07:48 AM

RE: diy mahlapress. - Autor: nustu826 - 27-09-2016, 21:38 PM

RE: diy mahlapress. - Autor: linnuke - 27-09-2016, 21:59 PM

RE: diy mahlapress. - Autor: Marko - 29-09-2016, 22:56 PM

RE: diy mahlapress. - Autor: linnuke - 29-09-2016, 23:11 PM

RE: diy mahlapress. - Autor: lauren - 02-10-2016, 20:49 PM

RE: diy mahlapress. - Autor: Marko - 10-10-2016, 22:38 PM

RE: diy mahlapress. - Autor: muska71 - 11-10-2016, 14:37 PM

RE: diy mahlapress. - Autor: raulex - 29-09-2016, 06:27 AM

RE: diy mahlapress. - Autor: huvi5 - 29-09-2016, 19:56 PM

RE: diy mahlapress. - Autor: linnuke - 29-09-2016, 21:12 PM

RE: diy mahlapress. - Autor: isandpauk - 29-09-2016, 21:28 PM

RE: diy mahlapress. - Autor: linnuke - 01-10-2016, 12:18 PM

RE: diy mahlapress. - Autor: Veskioja - 01-10-2016, 21:16 PM

RE: diy mahlapress. - Autor: linnuke - 01-10-2016, 21:31 PM

RE: diy mahlapress. - Autor: linnuke - 01-10-2016, 21:52 PM

RE: diy mahlapress. - Autor: Veskioja - 01-10-2016, 23:23 PM

RE: diy mahlapress. - Autor: linnuke - 01-10-2016, 23:45 PM

RE: diy mahlapress. - Autor: motamees - 02-10-2016, 10:37 AM

RE: diy mahlapress. - Autor: alfredo - 02-10-2016, 21:58 PM

RE: diy mahlapress. - Autor: Envir - 11-10-2016, 10:04 AM

RE: diy mahlapress. - Autor: linnuke - 11-10-2016, 14:30 PM

RE: diy mahlapress. - Autor: Marko - 11-10-2016, 14:30 PM

RE: diy mahlapress. - Autor: linnuke - 19-10-2016, 21:26 PM

RE: diy mahlapress. - Autor: sugraM - 20-10-2016, 07:08 AM

RE: diy mahlapress. - Autor: Talupoeg taluja - 29-10-2016, 22:35 PM

RE: diy mahlapress. - Autor: linnuke - 29-10-2016, 22:56 PM

RE: diy mahlapress. - Autor: Talupoeg taluja - 30-10-2016, 12:43 PM

RE: diy mahlapress. - Autor: Basilio - 30-10-2016, 18:05 PM

RE: diy mahlapress. - Autor: Martti - 14-01-2017, 20:54 PM

RE: diy mahlapress. - Autor: Killer666 - 30-10-2016, 10:27 AM

RE: diy mahlapress. - Autor: Talupoeg taluja - 30-10-2016, 12:40 PM

RE: diy mahlapress. - Autor: Talupoeg taluja - 30-10-2016, 18:27 PM

RE: diy mahlapress. - Autor: muska71 - 30-10-2016, 19:05 PM

RE: diy mahlapress. - Autor: Talupoeg taluja - 30-10-2016, 19:15 PM

RE: diy mahlapress. - Autor: Basilio - 31-10-2016, 13:18 PM

RE: diy mahlapress. - Autor: rocker - 01-11-2016, 09:02 AM

RE: diy mahlapress. - Autor: Marko - 30-10-2016, 19:28 PM

RE: diy mahlapress. - Autor: Talupoeg taluja - 30-10-2016, 19:46 PM

RE: diy mahlapress. - Autor: meli666 - 30-10-2016, 21:30 PM

RE: diy mahlapress. - Autor: Talupoeg taluja - 30-10-2016, 21:43 PM

RE: diy mahlapress. - Autor: kylminaator - 30-10-2016, 22:31 PM

RE: diy mahlapress. - Autor: Talupoeg taluja - 31-10-2016, 13:39 PM

RE: diy mahlapress. - Autor: Talupoeg taluja - 01-11-2016, 18:13 PM

RE: diy mahlapress. - Autor: Marko - 01-11-2016, 18:41 PM

RE: diy mahlapress. - Autor: Talupoeg taluja - 01-11-2016, 18:56 PM

RE: diy mahlapress. - Autor: meli666 - 16-08-2018, 22:11 PM

RE: diy mahlapress. - Autor: Marko - 16-08-2018, 22:37 PM

RE: diy mahlapress. - Autor: viplala - 16-08-2018, 22:54 PM

RE: diy mahlapress. - Autor: meli666 - 16-08-2018, 22:56 PM

RE: diy mahlapress. - Autor: honkomees - 17-08-2018, 09:12 AM

RE: diy mahlapress. - Autor: v6sa - 17-08-2018, 10:34 AM

RE: diy mahlapress. - Autor: v6sa - 17-08-2018, 10:32 AM

RE: diy mahlapress. - Autor: PlyVal64 - 17-08-2018, 11:50 AM

RE: diy mahlapress. - Autor: Marko - 17-08-2018, 11:58 AM

RE: diy mahlapress. - Autor: Mahno - 21-08-2018, 12:58 PM

RE: diy mahlapress. - Autor: meli666 - 23-08-2018, 21:52 PM

RE: diy mahlapress. - Autor: Etsike - 16-08-2018, 22:22 PM

RE: diy mahlapress. - Autor: honkomees - 16-08-2018, 22:45 PM

RE: diy mahlapress. - Autor: diesel - 17-08-2018, 09:08 AM

RE: diy mahlapress. - Autor: rocker - 26-08-2018, 12:40 PM

RE: diy mahlapress. - Autor: Marko - 22-10-2018, 00:40 AM

RE: diy mahlapress. - Autor: Etsike - 22-07-2019, 18:03 PM

RE: diy mahlapress. - Autor: rocker - 23-07-2019, 22:36 PM

RE: diy mahlapress. - Autor: viplala - 22-07-2019, 18:24 PM

RE: diy mahlapress. - Autor: Etsike - 22-07-2019, 20:09 PM

RE: diy mahlapress. - Autor: viplala - 22-07-2019, 20:28 PM

RE: diy mahlapress. - Autor: meli666 - 22-07-2019, 20:45 PM

RE: diy mahlapress. - Autor: MeelisV - 22-07-2019, 21:23 PM

RE: diy mahlapress. - Autor: viplala - 24-07-2019, 01:12 AM

RE: diy mahlapress. - Autor: pen.skar - 11-10-2022, 16:27 PM

RE: diy mahlapress. - Autor: deus - 11-10-2022, 17:24 PM

RE: diy mahlapress. - Autor: Daff - 11-10-2022, 19:00 PM

RE: diy mahlapress. - Autor: ahtos - 07-11-2022, 10:31 AM

RE: diy mahlapress. - Autor: ahtos - 08-11-2022, 20:17 PM

RE: diy mahlapress. - Autor: pen.skar - 09-11-2022, 02:31 AM

RE: diy mahlapress. - Autor: ahtos - 10-11-2022, 19:29 PM

RE: diy mahlapress. - Autor: vanaain - 10-11-2022, 22:24 PM

RE: diy mahlapress. - Autor: Marden - 11-11-2022, 13:18 PM

RE: diy mahlapress. - Autor: ahtos - 11-11-2022, 15:36 PM

RE: diy mahlapress. - Autor: mesinik - 26-11-2022, 07:37 AM

RE: diy mahlapress. - Autor: ahtos - 28-11-2022, 18:50 PM

Vaata printerisõbralikku versiooni

Kasutaja, kes vaatavad seda teemat: 1 külali(st)ne

Logi sisse
Kasutajanimi:
Parool:	Kaotasid parooli?
	Mäleta mind