diy mahlapress.

Mahno
juhtiv punakuub

Postitused: 1,246
Teemad: 22
Liitus: Jul 2009
Maine: 44

#134

21-08-2018, 12:58 PM

Mul on selline horisontaalvõlliga purusti, tööorganiks tärklisevabriku kartuliriiv või selle jupp.

Purustab piisavalt, mahla tuleb kenasti, aga õunu viskab väga üles, kaan peab peal olema pidevalt. Väike kiusatus oli teha külje pealt laadimine, aga kuna aastas tuleb täpselt 1 kord mahla teha, siis jääb see alati "järgmise korra" peale Smile

Selle hammaste nihkega ei ole mõtet pead vaevata - see õun ei seisa seal paigal, vaid lendab ringi ja hammaste nihke asemel toimub õuna nihutamine.

Leia

Vasta

« Järgmine vanem | Järgmine uuem »

Sõnumeid selles teemas

diy mahlapress. - Autor: Killer666 - 20-08-2013, 20:08 PM

RE: diy mahlapress. - Autor: Illimar - 20-08-2013, 20:38 PM

RE: diy mahlapress. - Autor: Killer666 - 20-08-2013, 20:53 PM

RE: diy mahlapress. - Autor: nunu - 21-08-2013, 00:11 AM

RE: diy mahlapress. - Autor: pontu6 - 20-08-2013, 20:40 PM

RE: diy mahlapress. - Autor: muska71 - 27-08-2013, 19:03 PM

RE: diy mahlapress. - Autor: Alts - 20-08-2013, 20:57 PM

RE: diy mahlapress. - Autor: hulgus - 21-08-2013, 00:05 AM

RE: diy mahlapress. - Autor: Arnol - 25-08-2013, 19:36 PM

RE: diy mahlapress. - Autor: runts - 25-08-2013, 19:56 PM

RE: diy mahlapress. - Autor: Killer666 - 25-08-2013, 20:01 PM

RE: diy mahlapress. - Autor: pen.skar - 25-08-2013, 20:11 PM

RE: diy mahlapress. - Autor: runts - 25-08-2013, 20:15 PM

RE: diy mahlapress. - Autor: tiitnato - 25-08-2013, 22:33 PM

RE: diy mahlapress. - Autor: lauren - 25-08-2013, 23:21 PM

RE: diy mahlapress. - Autor: diesel - 25-08-2013, 23:24 PM

RE: diy mahlapress. - Autor: pontu6 - 26-08-2013, 00:05 AM

RE: diy mahlapress. - Autor: pen.skar - 25-08-2013, 23:37 PM

RE: diy mahlapress. - Autor: aavu - 26-08-2013, 08:23 AM

RE: diy mahlapress. - Autor: sugraM - 26-08-2013, 08:48 AM

RE: diy mahlapress. - Autor: MeelisV - 26-08-2013, 09:13 AM

RE: diy mahlapress. - Autor: pvr - 02-09-2013, 11:03 AM

RE: diy mahlapress. - Autor: sugraM - 21-09-2016, 19:19 PM

RE: diy mahlapress. - Autor: Ishijupp - 26-08-2013, 18:41 PM

RE: diy mahlapress. - Autor: Killer666 - 26-08-2013, 19:00 PM

RE: diy mahlapress. - Autor: Mahno - 27-08-2013, 16:52 PM

RE: diy mahlapress. - Autor: nustu826 - 27-08-2013, 20:35 PM

RE: diy mahlapress. - Autor: myrakaru - 02-09-2013, 11:59 AM

RE: diy mahlapress. - Autor: TeeTL - 30-09-2013, 14:30 PM

RE: diy mahlapress. - Autor: Walter - 02-09-2013, 12:30 PM

RE: diy mahlapress. - Autor: laplander - 02-09-2013, 19:38 PM

RE: diy mahlapress. - Autor: muska71 - 03-09-2013, 17:58 PM

RE: diy mahlapress. - Autor: hulgus - 25-09-2013, 22:32 PM

RE: diy mahlapress. - Autor: PlyVal64 - 29-09-2013, 21:37 PM

RE: diy mahlapress. - Autor: MeelisV - 30-09-2013, 11:09 AM

RE: diy mahlapress. - Autor: PlyVal64 - 06-10-2013, 23:43 PM

RE: diy mahlapress. - Autor: PlyVal64 - 30-09-2013, 16:05 PM

RE: diy mahlapress. - Autor: mlsluik - 30-09-2013, 17:14 PM

RE: diy mahlapress. - Autor: PlyVal64 - 30-09-2013, 18:05 PM

RE: diy mahlapress. - Autor: mlsluik - 30-09-2013, 18:19 PM

RE: diy mahlapress. - Autor: pontu6 - 30-09-2013, 17:26 PM

RE: diy mahlapress. - Autor: Ishijupp - 30-09-2013, 17:52 PM

RE: diy mahlapress. - Autor: pontu6 - 30-09-2013, 18:27 PM

RE: diy mahlapress. - Autor: pontu6 - 03-10-2014, 11:12 AM

RE: diy mahlapress. - Autor: Basilio - 30-09-2013, 19:09 PM

RE: diy mahlapress. - Autor: pontu6 - 01-10-2013, 13:35 PM

RE: diy mahlapress. - Autor: maisalup - 29-07-2015, 19:57 PM

RE: diy mahlapress. - Autor: alfredo - 04-09-2015, 17:42 PM

RE: diy mahlapress. - Autor: diesel - 04-09-2015, 17:55 PM

RE: diy mahlapress. - Autor: rocker - 26-09-2015, 18:17 PM

RE: diy mahlapress. - Autor: tanel. - 26-09-2015, 19:12 PM

RE: diy mahlapress. - Autor: Marko - 26-09-2015, 18:26 PM

RE: diy mahlapress. - Autor: diesel - 26-09-2015, 20:09 PM

RE: diy mahlapress. - Autor: rocker - 26-09-2015, 21:50 PM

RE: diy mahlapress. - Autor: vanauss - 27-09-2015, 10:39 AM

RE: diy mahlapress. - Autor: nootsii - 27-09-2015, 11:41 AM

RE: diy mahlapress. - Autor: Basilio - 27-09-2015, 13:36 PM

RE: diy mahlapress. - Autor: tanel. - 27-09-2015, 13:54 PM

RE: diy mahlapress. - Autor: Gravity - 27-09-2015, 18:17 PM

RE: diy mahlapress. - Autor: vanauss - 27-09-2015, 19:24 PM

RE: diy mahlapress. - Autor: diesel - 27-09-2015, 20:02 PM

RE: diy mahlapress. - Autor: maisalup - 27-09-2015, 21:42 PM

RE: diy mahlapress. - Autor: kaarelj - 02-11-2015, 00:14 AM

RE: diy mahlapress. - Autor: muskaa71 - 02-11-2015, 15:34 PM

RE: diy mahlapress. - Autor: pkmp - 01-12-2015, 17:23 PM

RE: diy mahlapress. - Autor: Marko - 01-12-2015, 17:40 PM

RE: diy mahlapress. - Autor: kaarelj - 05-09-2016, 16:56 PM

RE: diy mahlapress. - Autor: isandpauk - 22-09-2016, 09:02 AM

RE: diy mahlapress. - Autor: kaarelj - 22-09-2016, 23:54 PM

RE: diy mahlapress. - Autor: Veskioja - 27-09-2016, 16:50 PM

RE: diy mahlapress. - Autor: alfredo - 05-09-2016, 22:10 PM

RE: diy mahlapress. - Autor: muska71 - 21-09-2016, 20:03 PM

RE: diy mahlapress. - Autor: alfredo - 22-09-2016, 18:31 PM

RE: diy mahlapress. - Autor: Talupoeg taluja - 22-09-2016, 19:38 PM

RE: diy mahlapress. - Autor: isandpauk - 22-09-2016, 21:59 PM

RE: diy mahlapress. - Autor: alfredo - 23-09-2016, 07:48 AM

RE: diy mahlapress. - Autor: nustu826 - 27-09-2016, 21:38 PM

RE: diy mahlapress. - Autor: linnuke - 27-09-2016, 21:59 PM

RE: diy mahlapress. - Autor: Marko - 29-09-2016, 22:56 PM

RE: diy mahlapress. - Autor: linnuke - 29-09-2016, 23:11 PM

RE: diy mahlapress. - Autor: lauren - 02-10-2016, 20:49 PM

RE: diy mahlapress. - Autor: Marko - 10-10-2016, 22:38 PM

RE: diy mahlapress. - Autor: muska71 - 11-10-2016, 14:37 PM

RE: diy mahlapress. - Autor: raulex - 29-09-2016, 06:27 AM

RE: diy mahlapress. - Autor: huvi5 - 29-09-2016, 19:56 PM

RE: diy mahlapress. - Autor: linnuke - 29-09-2016, 21:12 PM

RE: diy mahlapress. - Autor: isandpauk - 29-09-2016, 21:28 PM

RE: diy mahlapress. - Autor: linnuke - 01-10-2016, 12:18 PM

RE: diy mahlapress. - Autor: Veskioja - 01-10-2016, 21:16 PM

RE: diy mahlapress. - Autor: linnuke - 01-10-2016, 21:31 PM

RE: diy mahlapress. - Autor: linnuke - 01-10-2016, 21:52 PM

RE: diy mahlapress. - Autor: Veskioja - 01-10-2016, 23:23 PM

RE: diy mahlapress. - Autor: linnuke - 01-10-2016, 23:45 PM

RE: diy mahlapress. - Autor: motamees - 02-10-2016, 10:37 AM

RE: diy mahlapress. - Autor: alfredo - 02-10-2016, 21:58 PM

RE: diy mahlapress. - Autor: Envir - 11-10-2016, 10:04 AM

RE: diy mahlapress. - Autor: linnuke - 11-10-2016, 14:30 PM

RE: diy mahlapress. - Autor: Marko - 11-10-2016, 14:30 PM

RE: diy mahlapress. - Autor: linnuke - 19-10-2016, 21:26 PM

RE: diy mahlapress. - Autor: sugraM - 20-10-2016, 07:08 AM

RE: diy mahlapress. - Autor: Talupoeg taluja - 29-10-2016, 22:35 PM

RE: diy mahlapress. - Autor: linnuke - 29-10-2016, 22:56 PM

RE: diy mahlapress. - Autor: Talupoeg taluja - 30-10-2016, 12:43 PM

RE: diy mahlapress. - Autor: Basilio - 30-10-2016, 18:05 PM

RE: diy mahlapress. - Autor: Martti - 14-01-2017, 20:54 PM

RE: diy mahlapress. - Autor: Killer666 - 30-10-2016, 10:27 AM

RE: diy mahlapress. - Autor: Talupoeg taluja - 30-10-2016, 12:40 PM

RE: diy mahlapress. - Autor: Talupoeg taluja - 30-10-2016, 18:27 PM

RE: diy mahlapress. - Autor: muska71 - 30-10-2016, 19:05 PM

RE: diy mahlapress. - Autor: Talupoeg taluja - 30-10-2016, 19:15 PM

RE: diy mahlapress. - Autor: Basilio - 31-10-2016, 13:18 PM

RE: diy mahlapress. - Autor: rocker - 01-11-2016, 09:02 AM

RE: diy mahlapress. - Autor: Marko - 30-10-2016, 19:28 PM

RE: diy mahlapress. - Autor: Talupoeg taluja - 30-10-2016, 19:46 PM

RE: diy mahlapress. - Autor: meli666 - 30-10-2016, 21:30 PM

RE: diy mahlapress. - Autor: Talupoeg taluja - 30-10-2016, 21:43 PM

RE: diy mahlapress. - Autor: kylminaator - 30-10-2016, 22:31 PM

RE: diy mahlapress. - Autor: Talupoeg taluja - 31-10-2016, 13:39 PM

RE: diy mahlapress. - Autor: Talupoeg taluja - 01-11-2016, 18:13 PM

RE: diy mahlapress. - Autor: Marko - 01-11-2016, 18:41 PM

RE: diy mahlapress. - Autor: Talupoeg taluja - 01-11-2016, 18:56 PM

RE: diy mahlapress. - Autor: meli666 - 16-08-2018, 22:11 PM

RE: diy mahlapress. - Autor: Marko - 16-08-2018, 22:37 PM

RE: diy mahlapress. - Autor: viplala - 16-08-2018, 22:54 PM

RE: diy mahlapress. - Autor: meli666 - 16-08-2018, 22:56 PM

RE: diy mahlapress. - Autor: honkomees - 17-08-2018, 09:12 AM

RE: diy mahlapress. - Autor: v6sa - 17-08-2018, 10:34 AM

RE: diy mahlapress. - Autor: v6sa - 17-08-2018, 10:32 AM

RE: diy mahlapress. - Autor: PlyVal64 - 17-08-2018, 11:50 AM

RE: diy mahlapress. - Autor: Marko - 17-08-2018, 11:58 AM

RE: diy mahlapress. - Autor: Mahno - 21-08-2018, 12:58 PM

RE: diy mahlapress. - Autor: meli666 - 23-08-2018, 21:52 PM

RE: diy mahlapress. - Autor: Etsike - 16-08-2018, 22:22 PM

RE: diy mahlapress. - Autor: honkomees - 16-08-2018, 22:45 PM

RE: diy mahlapress. - Autor: diesel - 17-08-2018, 09:08 AM

RE: diy mahlapress. - Autor: rocker - 26-08-2018, 12:40 PM

RE: diy mahlapress. - Autor: Marko - 22-10-2018, 00:40 AM

RE: diy mahlapress. - Autor: Etsike - 22-07-2019, 18:03 PM

RE: diy mahlapress. - Autor: rocker - 23-07-2019, 22:36 PM

RE: diy mahlapress. - Autor: viplala - 22-07-2019, 18:24 PM

RE: diy mahlapress. - Autor: Etsike - 22-07-2019, 20:09 PM

RE: diy mahlapress. - Autor: viplala - 22-07-2019, 20:28 PM

RE: diy mahlapress. - Autor: meli666 - 22-07-2019, 20:45 PM

RE: diy mahlapress. - Autor: MeelisV - 22-07-2019, 21:23 PM

RE: diy mahlapress. - Autor: viplala - 24-07-2019, 01:12 AM

RE: diy mahlapress. - Autor: pen.skar - 11-10-2022, 16:27 PM

RE: diy mahlapress. - Autor: deus - 11-10-2022, 17:24 PM

RE: diy mahlapress. - Autor: Daff - 11-10-2022, 19:00 PM

RE: diy mahlapress. - Autor: ahtos - 07-11-2022, 10:31 AM

RE: diy mahlapress. - Autor: ahtos - 08-11-2022, 20:17 PM

RE: diy mahlapress. - Autor: pen.skar - 09-11-2022, 02:31 AM

RE: diy mahlapress. - Autor: ahtos - 10-11-2022, 19:29 PM

RE: diy mahlapress. - Autor: vanaain - 10-11-2022, 22:24 PM

RE: diy mahlapress. - Autor: Marden - 11-11-2022, 13:18 PM

RE: diy mahlapress. - Autor: ahtos - 11-11-2022, 15:36 PM

RE: diy mahlapress. - Autor: mesinik - 26-11-2022, 07:37 AM

RE: diy mahlapress. - Autor: ahtos - 28-11-2022, 18:50 PM

Vaata printerisõbralikku versiooni

Kasutaja, kes vaatavad seda teemat: 1 külali(st)ne

Logi sisse
Kasutajanimi:
Parool:	Kaotasid parooli?
	Mäleta mind