26-07-2002, 00:35 AM
Tsitaat:Horsepower 700@6600 rpm
Torque 630 fp@5300rpm
0-60 mph 3,3 sec
Acc @ 50 mph 0,88 G in 2;gear
Braking power* 1,06 G
Ski pad** 1,06 G
According to Cygnus computer, which is an on board computer with wheel rotation, crank and other type of sensors to measure performance, 700 hp at 6600 rpm, measured installed in the car with 20 disc Supertrapp. Eqvivalent motors by Ray Barton produce 775 hp and 700 foot pound, in the bench dyno. I tuned the headers at a little lower rpm than max HP. The ZF gearbox put an limit to fast starts, as one cannot let the clutch go at high rpm. Gearbox will probably break from the added kinetic energy stored by the rotating mass. But it does seem to handle the torque itself well. Now I am not too concerned. This is not a 1/4 mile car, so a road racing set up is to prefer.
* Braking speed 60 - 30 mph. ** Test is made in a circle of 200 foot diameter
http://hem.passagen.se/hemipanter/
http://hem.passagen.se/hemipanter/?noframe
NB Pantera stock tühikaal kõigub umbkaudu 1350 - 1450kg vahepeal, olenevalt lähteandmetest.
Prepareeritud autod võivad muidugi kergemad - raskemad olla
